Operating Instruction SD 4500 (01)

12 English
1. Fit the belt hook.
2. Attach your power tool to the belt hook.
3. Check that belt hook and power tool are secure.
5.5 Working safely with the belt hook and universal hook
▶ Before beginning work, make sure that the belt hook and universal hook
are securely attached to the screwdriver.
▶ Use the universal hook only when necessary. Lay the screwdriver down
in a safe place when it is not in use for a long period.
5.6 Changing the accessory tool.
1. Pull the depth gauge away from the power tool, releasing the snap-on
connection.
2. Push the chuck towards the screwdriver, turning the chuck slightly at the
same time, and then hold it in this position.
3. Remove the accessory tool with your other hand.
4. Insert the desired accessory tool in the chuck, pushing it into the
screwdriver as far as it will go.
5.7 Forward / reverse
The control switch is locked when the forward / reverse switch is in the
middle position (safety lock).
Printed: 15.07.2019 | Doc-Nr: PUB / 5295850 / 000 / 02