-EF, X-FCM-R_(NG), X-FCM-M-(NG) and X-FCS-R fastening system in off-shore and shipbuilding application

5.2 This type of product is within the category HBV of BUREAU VERITAS Rule Note NR320 and as such does not require a

BUREAU VERITAS product certificate.

5.3 Hilti Corporation has to make the necessary arrangements to have its works recognised by BUREAU VERITAS in

compliance with the requirements of NR320 for HBV products.

5.4 For information, Hilti Corporation has declared to BUREAU VERITAS the following production sites:

S-BT-MR, S-BT-MF, S-BT-GR, S-BT-GF, S-BT-ER and S-BT-EF:

Hilti Plant 1, Schaan / LIECHTENSTEIN

X-FCM, X-FCM-M and X-FCM-R:

WP-Wörgartner Produktions GmbH, Oberndorf / AUSTRIA

Ningbo World Broad Hardware & Electrical Co., Ltd., Yuyao / CHINA

X-FCM-M NG and X-FCM-R NG:

Ningbo World Broad Hardware & Electrical Co., Ltd., Yuyao / CHINA

X-FCS-R:

Daepac Industries Sdn. Bhd., Ulu Tiram, Johor / MALAYSIA

6. MARKING OF PRODUCT:

The mechanical fastening system should be clearly identified with:

- Manufacturer’s name or logo

- Type designation

7. OTHERS:

7.1 The mechanical fastening systems will be delivered with the relevant documentation / user’s guide.

7.2 It is Hilti Corporation’s responsibility to inform shipbuilders or their sub-contractors of the proper methods of fitting, use

and general maintenance of the approved equipment and the conditions of this approval.

7.3 This certificate supersedes the Type Approval Certificate N° 45116/A2 BV issued on 24 Sep 2018 by the Society.

*** END OF CERTIFICATE ***

Page 5 / 5

Certificate number: 45116/B0 BV

The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=lky9pzfepr

BV Mod. Ad.E 530 June 2017 This certificate consists of 5 page(s)