Operating Instruction DD 250-CA
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Preparations at the workplace
- 5.1 DD-HD 30: Setting up the drill stand and setting the drilling angle
- 5.2 DD-HD 30: Locking the carriage on the drill stand
- 5.3 Fitting the hand wheel on the drill stand
- 5.4 Securing the drill stand with an anchor
- 5.5 Securing the drill stand by vacuum
- 5.6 DD-HD 30: Fastening the drill stand with the threaded spindle (accessory)
- 5.7 DD-HD 30: Extending the rail (accessory) on the drill stand
- 5.8 DD-HD 30: Fitting the spacer (accessory)
- 5.9 DD-HD 30: Attaching the diamond core drilling machine to the drill stand
- 5.10 Fitting the water connection (accessory)
- 5.11 installing the water collection system (accessory)
- 6 Types of work
- 6.1 Setting the depth gage (accessory)
- 6.2 Fitting the diamond core bit (BL chuck)
- 6.3 Fitting the diamond core bit with an alternative type of chuck
- 6.4 Selecting the speed
- 6.5 Portable residual current device (PRCD)
- 6.6 Operating the diamond core drilling machine
- 6.7 Switching off the diamond core drilling machine
- 6.8 DD-HD 30: Detaching the diamond core drilling machine from the drill stand
- 7 Care and maintenance
- 8 Transport and storage
- 9 Troubleshooting
- 10 Disposal
- 11 FCC statement (applicable in US) / IC statement (applicable in Canada)
- 12 Manufacturer’s warranty
- 13 Further information
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Préparatifs
- 5.1 DD-HD 30 : Montage de la colonne de forage et ajustement de l'angle de forage
- 5.2 DD-HD 30 : Blocage du boîtier de guidage sur la colonne de forage
- 5.3 Montage du volant à main sur la colonne de forage
- 5.4 Fixation de la colonne de forage avec bride d'ancrage
- 5.5 Fixation de la colonne de forage avec une semelle-ventouse
- 5.6 DD-HD 30 : Fixation de la colonne de forage avec broche filetée (accessoire)
- 5.7 DD-HD 30 : Rallonge de la crémaillère (accessoire) sur la colonne de forage
- 5.8 DD-HD 30 : Montage de l'entretoise (accessoire)
- 5.9 DD-HD 30 : Fixation de la carotteuse diamant sur la colonne de forage
- 5.10 Installation du raccordement d'eau (accessoire)
- 5.11 Montage du système de récupération d'eau (accessoire)
- 6 Travail
- 6.1 Réglage de la butée de profondeur (accessoire)
- 6.2 Mise en place de la couronne diamantée (porte-outil BL)
- 6.3 Montage de la couronne diamantée avec un porte-outil alternatif
- 6.4 Sélection de la vitesse de rotation
- 6.5 Disjoncteur à tension nulle PRCD
- 6.6 Maniement de la carotteuse diamant
- 6.7 Mise en arrêt de la carotteuse diamant
- 6.8 DD-HD 30 : Démontage de la carotteuse diamant de la colonne de forage
- 7 Nettoyage et entretien
- 8 Transport et entreposage
- 9 Aide au dépannage
- 10 Recyclage
- 11 Déclaration FCC (valable aux États-Unis) / Déclaration IC (valable au Canada)
- 12 Garantie constructeur
- 13 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Preparación del trabajo
- 5.1 DD-HD 30: montaje del soporte y ajuste del ángulo de perforación
- 5.2 DD-HD 30: bloqueo del carro en el soporte
- 5.3 Montaje de la rueda de mano en el soporte
- 5.4 Fijación del soporte con taco
- 5.5 Fije el soporte mediante vacío
- 5.6 DD-HD 30: fijación del soporte con el husillo roscado (accesorio)
- 5.7 DD-HD 30: prolongación del raíl (accesorio) en el soporte
- 5.8 DD-HD 30: montaje del distanciador (accesorio)
- 5.9 DD-HD 30: fijación de la perforadora de diamante en el soporte
- 5.10 Instalación de la toma del agua (accesorio)
- 5.11 Montaje del sistema colector de agua (accesorio)
- 6 Procedimiento de trabajo
- 6.1 Ajuste del tope de profundidad (accesorio)
- 6.2 Montaje de corona perforadora de diamante (portaútiles BL)
- 6.3 Montaje de la corona perforadora de diamante con portaútiles alternativo
- 6.4 Selección de la velocidad
- 6.5 Interruptor de corriente de defecto PRCD
- 6.6 Uso de la perforadora de diamante
- 6.7 Desconexión de la perforadora de diamante
- 6.8 DD-HD 30: retirada de la perforadora de diamante del soporte
- 7 Cuidado y mantenimiento
- 8 Transporte y almacenamiento
- 9 Ayuda en caso de averías
- 10 Reciclaje
- 11 Indicación FCC (válida en EE. UU.) / indicación lC (válida en Canada)
- 12 Garantía del fabricante
- 13 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Preparação do local de trabalho
- 5.1 DD-HD 30: Montar a coluna e ajustar o ângulo de perfuração
- 5.2 DD-HD 30: Travar o patim na coluna
- 5.3 Montar o volante à coluna
- 5.4 Fixar a coluna com bucha
- 5.5 Fixar a coluna com vácuo
- 5.6 DD-HD 30: Fixar a coluna com o varão de enroscar (acessório)
- 5.7 DD-HD 30: Utilizar a extensão da guia (acessório) na coluna
- 5.8 DD-HD 30: Montar o distanciador (acessório)
- 5.9 DD-HD 30: Fixar o perfurador diamantado à coluna
- 5.10 Ligar o fornecimento de água (acessório)
- 5.11 Montar o sistema colector de água (acessório)
- 6 Trabalhar
- 6.1 Ajustar o limitador de profundidade (acessório)
- 6.2 Colocar a coroa diamantada (mandril BL)
- 6.3 Montar a coroa diamantada com porta-ferramentas alternativo
- 6.4 Seleccionar a rotação
- 6.5 Disjuntor de segurança PRCD
- 6.6 Operar o perfurador diamantado
- 6.7 Desligar o perfurador diamantado
- 6.8 DD-HD 30: Separar o perfurador diamantado da coluna
- 7 Conservação e manutenção
- 8 Transporte e armazenamento
- 9 Ajuda em caso de avarias
- 10 Reciclagem
- 11 Declaração FCC / IC
- 12 Garantia do fabricante
- 13 Mais informações
*2279864*
2279864 English 1
Original operating instructions
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.