Operating Instruction DSH 700X-900X

*2271385*
2271385 English 3
1.3.4 Prohibition symbols
The following prohibition symbols are used on the product:
Do not use toothed cutting discs
Do not use damaged cutting discs
No smoking, no naked flame
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Cut-off saw DSH 700-X | DSH 900-X
Generation 03
Serial no.
1.5 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the document issued by the certification body can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety
2.1 General safety instructions
WARNING Study all safety instructions and other instructions, images and technical data with which
this product is provided. Failure to comply with the instructions below can result in serious injuries or death.
Keep all safety precautions and instructions for future reference.
2.2 Personal safety
▶ Use the right tool for the job. Do not use the tool for purposes for which it was not intended. Use it only
as directed and when in technically faultless condition.
▶ Never tamper with or modify the power tool in any way.
▶ Only persons who are familiar with it, who have been trained on how to use it safely and who understand
the resulting hazards are permitted to use the product. The product is not intended for use by children.
▶ Stay alert, watch what you are doing and use common sense when operating the product. Do not use
the product while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the product can result in serious personal injury.
▶ Maintain a firm grip on the cut-off saw with both hands and position your body and arms to absorb
kickback forces. Always use the auxiliary handle, if provided, for maximum control over kickback
forces or torque reaction during start-up. By adopting suitable precautionary measures the operator
can control the kickback and reaction forces.
▶ The use of cutting tools other than those described in this documentation is not permitted.
▶ For wet cutting, do not use synthetically bonded abrasive discs unless the discs have been specified for
such use by the disc manufacturer.
▶ The use of reducing sleeves and/or knot wheel brushes is not permitted.