Operating instructions

2.12 Operating status indicators
Operating status is indicated as follows: auto-leveling LED, battery statusLED,shockwarningLEDandslopeLED.
2.13 LED indicators
Auto-leveling LED (green) The green LED blinks. The tool is in the leveling phase.
The green LED lights con-
stantly.
The tool has leveled itself / is operating
normally.
Shock warning LED (orange) The orange LED lights con-
stantly.
Shock warning mode is deactivated.
Surveillance LED (orange) The LED lights orange. The tool is in surveillance mode.
Slope LED (orange) The orange LED blinks. Alignment in the sloping plane.
TheorangeLEDlightscon-
stantly.
Slope mode is active.
Several LEDs light 2 LEDs blink orange. The tool is in axis alignment (slope)
mode.
All LEDs All LEDs blink The tool has been bumped, knocked off
level or is exhibiting some other error.
2.14 Charge status of the Li‑ion battery during operation
LEDs light constantly LEDs blink
Charge status C
LED 1,2,3,4
-
C≧75%
LED 1,2,3
-
50 % ≦ C < 75 %
LED 1,2
-
25 % ≦ C < 50 %
LED 1
-
10 % ≦ C < 25 %
-
LED 1
C<10%
2.15 Charge status of the Li‑ion battery during charging while inserted in the tool
LEDs light constantly LEDs blink
Charge status C
LED1,2,3,4
-
C=100%
LED1,2,3 LED4
C≧75%
LED1,2 LED3
50 % ≦ C < 75 %
LED1 LED2
25 % ≦ C < 50 %
-
LED 1
C<25%
2.16 Charge status of the Li‑ion battery during charging while not inserted in the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn’t light, the battery is fully charged.
3 Accessories
Designation Description
Remote control / laser receiver PRA 35
Laser receiver PRA 38, PRA 30/31
Target plate PRA 50/51
Wall mount PRA 70/71
Slope calculator PRA 52
Slope adapter PRA 78
en
19
Printed: 08.07.2013 | Doc-Nr: PUB / 5070233 / 000 / 01