Safety Data Sheet (SDS) for Spray Lube

Page 3/6
Safety Data Sheet
acc. to ISO 11014
Printing date 05/18/2015 Reviewed on 05/06/2015Version number 1
Trade name:
Hilti Spray
(Contd. of page 2)
40.1.3
*
8 Exposure controls/personal protection
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the
workplace.
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment
·
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
Do not eat, drink, smoke or sniff while working.
Do not inhale gases / fumes / aerosols.
Wash hands before breaks and at the end of work.
·
Breathing equipment:
Not required.
Avoid breathing mist.
·
Protection of hands:
Protective gloves.
Avoid direct contact with the chemical/ the product/ the preparation by organizational measures.
·
Material of gloves
Butyl rubber, BR
Natural rubber, NR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
·
Eye protection:
Safety glasses
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Fluid
Color:
colourless-yellowish
·
Odor:
Mineral-oil-like
·
Odour threshold:
Not determined.
·
pH-value:
Slightly acidic
·
Change in condition
Melting point/Melting range:
Not determined.
Boiling point/Boiling range:
undetermined
·
Flash point:
Not applicable
·
Flammability (solid, gaseous)
Not determined
·
Ignition temperature:
Decomposition temperature:
> 200 °C (> 392 °F)
·
Auto igniting:
Product is not selfigniting.
·
Danger of explosion:
Product does not present an explosion hazard.
·
Explosion limits:
Lower:
Not determined.
Upper:
Not determined.
(Contd. on page 4)
US EN