Instructions / Assembly

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 08-22-2013
Page 1 of 1
WARRINGTON GAME CHAIR
Model #6125-801 Wood Game Chair
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 1
Begin assembly by attaching the Chair Back (K) to the
Seat Frame (L) using 2 Allen Bolts (A), 2 Spring Washers (E)
& 2 Flat Washers (F) per each corner from the bottom, and 1
Allen Bolt (C), 1 Spring Washer (E) & 1 Flat Washer (F) in the
center from the bottom. Do not fully tighten bolts.
STEP 2
Next attach each left and right Side Arm (M) to each appropriate
side of the Seat Frame (L) by aligning the holes and securing
each from the bottom with 2 Allen Bolts (B), 2 Spring Washers (E)
& 2 Flat Washers (F) per each arm. Do not fully tighten bolts.
STEP 3
Finish securing each Side Arm (M) to the Chair Back (K) by
aligning holes and securing from the bottom of the arm using 1 Allen
Bolt (C) & 1 Spring Washer (E). Make sure dowel fits tightly into hole on
back panel. Tighten all bolts from Steps 1 through 3.
STEP 4
After removing the red cover, insert the Gas Lift (Q) into the center area of
the Leg Base (O) and slip the Bellows (R) in place on top. Connect the Gas
Lift (Q) to the bottom of the Metal Plate (N) by screwing in place.
STEP 5
Attach the Metal Plate (N) to the bottom of the Seat Frame (L) with 4 Allen
Bolts (D), 4 Spring Washers (E) & 4 Flat Washers (F) to secure in place.
Make sure the lift handle is on the left side facing the chair.
STEP 6
Finally attach each Leg Cover (P) to the top of each Leg on the Leg
Base (O) by fitting in place using 2 Wood Screws (J) per leg. Then
attach the Casters (G) to each leg and and tighten in place using the Hex
Wrench (I) that has been provided. The assembly is now complete.
HARDWARE LIST
A (4) Allen Bolts 1/4” x 2-3/4”
B (4) Allen Bolts 1/4” x 2”
C (3) Allen Bolts 1/4” x 1-1/2”
D (4) Allen Bolts 1/4” x 1”
E (15) Spring Washers
F (13) Flat Washers
G (5) Casters
H (1) Allen Wrench
I (1) Hex Wrench
J (10) Wood Screws
PARTS LIST
K (1) Chair Back
L (1) Seat Frame
M (2) Side Arms (Left and Right)
N (1) Metal Plate
O (1) Leg Base
P (5) Leg Covers
Q (1) Gas Lift
R (1) Bellows
QTYPART
5G
1I
HARDWARE QTYPART HARDWARE
1
H
10J
15E 13F
3C 4D
4A 4B
* IMPORTANT*
Please remove the red
cover before assembly
Make sure
Dowel fits into
hole on Back Panel
AA
B
B
C
C
C
C
D
D
D
D
D
D
E
E
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
FF
F
F
F
F
G
G
G
G
G
G
G
G
G
G
J
J
J
J
K
L
M
M
N
Q
R
O
P
Make sure
handle is
on left side