User's Manual

Table Of Contents
Note
All persons' face pictures will be exported if you do not select any organizaon.
3.
Click Export t
o open the Export panel and check Face as the content to export.
4.
Click Export to start exporng.
Note
The e
xported le is in ZIP format.
The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face).
9.4.16 Delete Registered Pictures
You can delete face picture le of the added persons automacally.
Before You Start
Mak
e sure you have saved the structure data.
Steps
1.
Enter the Person module.
2.
Oponal: Select a person item in the list.
3.
Click Delete Registered Picture to delete the registered picture.
9.4.17 Get Person Informaon from Access Control Device
If the added access control device has been congured with person informaon (including person
de
tails and issued card informaon), you can get the person informaon from the device and
import them to the client for further operaons.
Steps
Note
If the per
son name stored in the device is empty, the person name will be lled with the issued
card No. aer imporng to the client.
The gender of the persons will be Male by default.
If the card number or person ID (employee ID) stored on the device already exists in the client
database, the person with this card number or person ID will not be imported to the client.
1.
En
ter Person module.
2.
Select an organizaon to import the persons.
3.
Click Get from Device.
4.
Select an added access control device or the enrollment staon from the drop-down list.
DS-K5671B Series Face
Recognion Terminal User Manual
149