User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Model
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Wiring
- Chapter 5 Activation
- Chapter 6 Quick Operation
- Chapter 7 Basic Operation
- Chapter 8 Operation via Web Browser
- 8.1 Login
- 8.2 Person Management
- 8.3 Configuration
- 8.3.1 View Device Information
- 8.3.2 Set Time
- 8.3.3 Set DST
- 8.3.4 View Open Source Software License
- 8.3.5 Upgrade and Maintenance
- 8.3.6 Security Mode Settings
- 8.3.7 Change Administrator's Password
- 8.3.8 View Device Arming/Disarming Information
- 8.3.9 Network Settings
- 8.3.10 Set Audio Parameters
- 8.3.11 Set Image Parameters
- 8.3.12 Set Authentication Parameters
- 8.3.13 Temperature Measurement Settings
- 8.3.14 Set Biometric Parameters
- 8.3.15 Visitor Settings
- 8.3.16 Set Screen Saver Picture
- Appendix A. Tips When Collecting/Comparing Face Picture
- Appendix B. Tips for Installation Environment
- Appendix C. Dimension
- Appendix D. Communication Matrix and Device Command
Figure 7-13 Temperature Measurement Parameters
The available parameters descripons are as follows:
Temp. Detecon
When enabling the funcon, the device will authencate the permissions and at the same me
take the temperature. When disabling the device, the device will authencate the permissions
only.
Unit
Select a temperature unit according to your preference.
Over-Temperature Threshold (Max.)
Congure the upper limit for temperature measurement result. Device will alarm when the
visitor's temperature exceeds the threshold. The value is 37.3 ℃ by default.
Over-Temperature Threshold (Min.)
Congure the lower limit for temperature measurement result. Device will alarm when the
visitor's temperature does not reach the threshold. The value is 35 ℃ by default.
Temp. Measurement Distance (m)
Congure the temperature measurement distance according to actual needs. Distance between
0.3 m to 2 m is recommended and is set 0.5 m by default.
End Check-in When Temperature is Higher than Normal
When the visitor's temperature exceeds the threshold, visitor check-in procedure will be
terminated.
DS-K5032-3XFD Visitor Terminal User Manual
27