User's Manual

Swing Barrier·User Manual
1
Chapter 1 Overview
1.1 Introduction
The swing barrier with two barriers and 12 IR lights is designed to detect unauthorized entrance or exit. By
adopting the swing barrier integrated with the access control system, person should authenticate to pass
through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in attractions, stadiums,
construction sites, residences, etc.
1.2 Main Features
 32-bit high-speed processor
 TCP/IP network communication
The communication data is specially encrypted to relieve the concern of privacy leak
 Permissions validation and anti-tailgating
 Remaining open/closed mode selectable
 Bidirectional (Entering/Exiting) lane
The barrier opening and closing speed can be configured according to the visitors flow
 The barrier will be locked or stop working when people are nipped.
 Anti-forced-accessing
The barrier will be locked automatically without open-barrier signal. It can bear the force of up
to 120 Nm.
 Self-detection, Self-diagnostics, and automatic alarm
 Audible and visual alarm will be triggered when detecting intrusion, tailgating, reverse passing,
climbing over barrier, and overstay.
 IP conflict detection
 Remote control and management
 Online/offline operation
 LED indicates the entrance/exit and light bar indicates passing status.