User's Manual

Result
On the inial page and authencate. If you do not select a status, the authencaon will be
marked as the congured aendance status according to the schedule. If you tap Select Status and
select a status to take aendance, the
authencaon will be marked as the selected aendance
status.
Ex
ample
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as Monday 12:00, the valid
user's authencaon from Monday 11:00 to 12:00 will be marked as break.
6.12 System Maintenance
You can view the system informaon and the capacity. You can also upgrade the device, restore to
factory sengs, and restore to default sengs.
Long tap on the inial page for 3 s and slide to the le/right by following the gesture and login the
home page. Tap Maint..
System Informaon
You can view the device model, serial No., versions, address, producon data, QR code, and
open source code license.
Note
The page may vary according to dierent device models. Refers to the actual page for details.
Capacity
Y
ou can view the number of, user, face picture, card, event and ngerprint.
Note
Parts of the device models support displaying the ngerprint number. Refers to the actual page
f
or details.
Device Upgrade
Plug the USB ash drive in the device USB interface. Tap Upgr
ade, and the device will read the
digicap.dav le in the USB ash drive to start upgrading.
Restore to Default
All parameters, except for the communicaon
sengs, remotely imported user informaon, will
be restored to the default sengs. The system will reboot to take eect.
Restore to Factory
All parameters will be restored to the factory sengs. The system will reboot to take eect.
DS-K1T642 Series Face
Recognion Terminal User Manual
39