User's Manual

Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
• Aer acvaon, you should select an applicaon mode. For details, see Se
t Applicaon Mode
• Aer acvaon, if you need to add the device to the client soware or other plaorms, you
should edit the device IP address. For details, see Communicaon Sengs.
5.2 Acvate via Web Browser
You can acvate the device via the web browser.
Steps
1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and
press Enter.
2. Create a new password (admin password) and conrm the password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
y
our own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
3. Click Acvate
.
4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the
client soware.
5.3 Acvate via SADP
SADP is a tool to detect, acvate
and modify the IP address of the device over the LAN.
Before You Start
• Get the SADP soware
from the supplied disk or the ocial website
hp://
www.hikvision.com/en/ , and install the SADP according to the prompts.
•
The device and the PC that runs the SADP tool should be within the same subnet.
The following steps show how to acvate a device and modify its IP address. For batch acvaon
and IP addresses modicaon, refer to User Manual of S
ADP for details.
Steps
1. Run the SADP soware and search the online devices.
2. Find and select y
our device in online device list.
3. Input new password (admin password) and conrm the password.
DS-K1T642 Series Face Recognion Terminal User Manual
13