User's Manual

Chapter 3 Installaon
3.1 Installaon Environment
• Avoid backlight, direct sunlight, and indirect sunlight.
• For
beer recognion, there should be light source in or near the installaon environment.
Note
For details about installaon environment, see Tip
s for Installaon Environment.
3.2 Wall Mounng
Steps
Note
The
addional force shall be equal to three mes the weight of the equipment. The equipment ad
its associated mounng means shall remain secure during the installaon. Aer the installaon,
the equipment, including any associated mounng plate, shall not be damaged.
1. Acc
ording to the datum line on the mounng template, sck the mounng template on the wall
or other surfaces, 1.4 meters higher than the ground.
2. Drill holes on the wall or other surface according to the instrucons on the mounng template.
3. Align the holes t
o the mounng plate and secure the mounng plate on the wall with the 4
supplied screws.
Figure 3-1 Install Mounng Plate
DS-K1T642 Series Face Recognion Terminal User Manual
3