Spec Sheet



DS-K1102 Series

Card Reader



LED Reader Status Indicator



Tamper-Resistant Alarm



Supports EM/Mifare Cards (Options)



Keypad (Option)



RS-485 and Wiegand (W26/W34)

Protocols

Hikvision’s DS-K1102 Series card readers

with dip switch are dust-proof and

water-resistant. They support RS-485 and

Wiegand (W26/W34) protocols. The built-in

125 KHz EM card reading module

(DS-K1102E/DS-K1102EK) reads EM card

numbers. The built-in 13.56 MHz Mifare card reading

module (DS-K1102M/DS-K1102MK) reads Mifare

card numbers. The DS-K1102 Series meets the ISO

14443-A standard.

Available Models: DS-K1102E: EM card reader

DS-K1102EK: EM card reader w/keypad

DS-K1102M: Mifare card reader

DS-K1102MK: Mifare card reader w/keypad

K1102E/M

K1102EK/MK

PAGE 1
DS-K1102 Series Card Reader LED Reader Status Indicator Tamper-Resistant Alarm Supports EM/Mifare Cards (Options) Keypad (Option) RS-485 and Wiegand (W26/W34) Protocols Hikvision’s DS-K1102 Series card readers with dip switch are dust-proof and water-resistant. They support RS-485 and Wiegand (W26/W34) protocols. The built-in 125 KHz EM card reading module (DS-K1102E/DS-K1102EK) reads EM card numbers. The built-in 13.
PAGE 2
Specifications Processor Reading Frequency Reading Range ID Settings Audio Alert Power Consumption Keypad Certifications LED Indicator Working Temperature Working Humidity Protection Level Installation Method Dimensions Weight Power Supply Working Current DS-K1102E 32-bit 125 KHz ≤1.