Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 172
Step 2 Click the FTP tab to enter the local upgrade interface.
Figure 18-11 FTP Upgrade Interface
Step 3 Enter the FTP Server Address in the text field.
Step 4 Click Upgrade to start upgrading.
Step 5 After upgrading is complete, reboot the device to activate the new firmware.
18.6 Restore Default Settings
Step 1 Go to Maintenance > Default.
Figure 18-12 Restore Defaults
Step 2 Select the restore type from the following three options.
• Restore Defaults: Restore all parameters, except the network (including IP address,
subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and
user account parameters, to the factory default settings.
• Factory Defaults: Restore all parameters to the factory default settings.
• Restore to Inactive: Restore the device to inactive status.
The device will reboot automatically after restoring to the default settings.