User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 032918NA 193
Figure 269, Camera Parameters Settings
2. Select the Camera from the drop-down list.
3. Configure the parameters.
1) Switch the 4 MP or 5 MP signal from the Signal Switch drop-down list.
4 MP 25/30 fps and 5 MP 20 fps are selectable. The 4 MP 25 fps and 4
MP 30 fps signals are self-adaptive for the camera.
2) Check Enable Defog to enable the defog function of the selected
camera, and set the Defog Level from 1 to 4.
3) Adjust the parameters including Day to Night Sensiti
vity, Night to Day
Sensitivity, and IR Light Brightness for the analog cameras.
4) Select the Day/Night Mode of the camera from the drop-down list.
5) Check the WDR Switch checkbox to enable the function of the
camera.
4. (Optional) Click Default to set the parameters to the default settings.
5. (Optional) Click Copy to copy the parameters of the current camera to
other analog cameras.
6. Click Apply to save the settings.
The camera parameters settings is applicable only for analog cameras.
The 4 MP/5 MP Signal Switch, Defog, Day to Night Sensitivity, Night to
Day Sensitivity, IR Light Brightness, Day/Night Mode, and WDR Switch
functions must be supported by the connected analog camera. You