User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 45

Figure 57, PTZ Panel, General

4. Click to enter the preset No. in the corresponding text field.

5. Click the Call Preset button to call it.

NOTE: When a Coaxitron camera/dome is connected and the PTZ protocol is

selected to HIKVISION-C, call the preset 95 to enter the menu of the

connected Coaxitron camera/dome. Use the directional buttons on the

PTZ control panel to operate the menu.

10.2.4. Customizing Patrols

Patrols can be set to move the PTZ to different key points and have it stay there for a set duration

before moving on to the next key point. The key points are corresponding to the presets. The

presets can be set following the steps above in

Customizing Presets

1. Enter the PTZ Settings interface, Menu > Camera > PTZ.

Figure 58, PTZ Settings

2. Select patrol No. in the drop-down list of patrol.