How to Guide

Title:
How to use Redundancy Record in Group Mode
Version:
v1.0
Date:
1/8/2019
Product:
NVR
Page:
1 of 4
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.hikvision.com
How to use Redundancy Record in Group Mode
Description
The customer may have the request to save the video record backup.
Note: This function need more than two hard disks and the redundancy must be used in group mode.
Preparation
NVR.
How to configure the group function in NVR:
Steps:
1. Enter Storage interface and select Storage Mode in the drop-down list on the top-left side.
2. Select Group mode in the right.
3. Click the channel which need to be record in redundancy and Apply.
4. Wait for the system rebooting.