User Manual

User Manual of Network Video Recorder
6
Product Key Features
General
 Connectable to network cameras, network dome and encoders.
 Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt
ONVIF or PSIA protocol.
 Connectable to the smart IP cameras.
 H.265/H.264/MPEG4 video formats
 PAL/NTSC adaptive video inputs.
 Each channel supports dual-stream.
 Up to 32/64 network cameras for other models.
 Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
 The quality of the input and output record is configurable.
Local Monitoring
 HDMI/VGA1 and HDMI2/VGA2 outputs provided for DS-9600NI-I8.
 HDMI and VGA outputs provided for DS-7600NI-I2 and DS-7700NI-I4.
 HDMI Video output at up to 4K resolution and VGA video output at up to 2K resolution.
 Multiple screen display in live view is supported, and the display sequence of channels is adjustable.
 Live view screen can be switched in group. Manual switch and auto-switch are provided and the
auto-switch interval is configurable.
 Quick setting menu is provided for live view.
 Motion detection, video tampering, video exception alert and video loss alert functions.
 Privacy mask.
 Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
 Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
 Up to 8 SATA hard disks and 1 eSATA disk can be connected for DS-9600NI-I8, 4 SATA hard disks for
DS-7700NI-I4 (/P) and 2 SATA hard disks for DS-7600NI-I2 (/P).
 Up to 6TB storage capacity for each disk supported.
 Support 8 network disks (NAS/IP SAN disk).
 Support S.M.A.R.T. and bad sector detection.
 HDD group management.
 Support HDD standby function.
 HDD property: redundancy, read-only, read/write (R/W).
 HDD quota management; different capacity can be assigned to different channel.
 (for DS-9600NI-I8)Hot-swappable HDD supporting RAID0, RAID1, RAID5 and RAID10 storage
scheme, and can be enabled and disabled on your demand. And 16 arrays can be configured.
 (for DS-9600NI-I8) Support disk clone to the eSATA disk.
Recording, Capture and Playback
The capture is supported by DS-9600NI-I8 only.
 Holiday recording schedule configuration.
 Continuous and event video recording parameters.