User Manual

User Manual of Network Camera
44
video for the motion occurred in the surveillance scene.
Tasks:
1. Set the Motion Detection Area.
Steps:
(1) Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
(2) Check the checkbox of Enable Motion Detection.
Figure 5-27 Enable Motion Detection
(3) Click . Click and drag the mouse on the live video image to draw a
motion detection area.
You can draw up to 8 motion detection areas on the same image.
(4) Click to finish drawing.
(5) (Optional) Click to clear all of the areas.
(6) (Optional) Move the slider to set the sensitivity of
the detection.
2. Set the Arming Schedule for Motion Detection.
Steps: