Data Sheet

DS-1271ZJ-130
Pendent Mounting Bracket for
Dome Camera
Features:
 Aluminum alloy material with surface spray
treatment
 Waterproof design
 Cable hole on bracket makes the feature better
 Design of cap is for convenient wiring
Dimension:
Order Model:
DS-1271ZJ-130
Parameter:
Model
Parameters
DS-1271ZJ-130
Pendent Mounting Bracket for
Dome Camera
Appearance
Hikvision White
Material
Aluminum Alloy
Dimension
Φ150X565mm
Weight
1900g
Notice:
 The bracket should be installed on flat wall
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CD7X3PF(NF)-E(I)(Z),DS-2CD793PFWD-E(I)(Z),DS-2CD793NFWD-E(I)(Z),DS-2CD7X4FWD-E(I)(Z)
DS-2CD7XXF-E(I)(Z),DS-2CD783F-EP,DS-2CD4112F-(I),DS-2CD4112FWD-(I),DS-2CD4124F-(I),DS-2CD4132FWD-(I)
Installation Step:
① Choose the appropriate
wall to install the ceiling
plate and wiring
② Connect pole and adaptor
cap; wiring and screw up
③ Screw up in A & B and fix
pendent pole and cap
④ Screw the dome to the cap
A & B: Fastening screw
C: Bayonet of dome adaptor
⑤ Check the hole site and
fix adaptor to cap
⑥ Wiring and fix dome
camera to adaptor
⑦ Rotate the dome camera
moderately and screw up
the fastening screw
⑧ Installation complete
D: Fastening screw on dome
Note: The actual dome camera may vary from the picture above.