User's Manual

Handheld Thermography Camera User Manual

Note

You can go to Local Settings → Device Settings → Device Initialization → Measurement Tool

Initialization to initialize the temperature measurement parameters.

4.1.1

Set Unit

Go to Local Settings → Device Settings → Unit to set the temperature unit and distance unit.

You can go to Local Settings → Image Settings → Display Settings to enable/disable the

temperature display.

4.2 Set Temperature Range

Set a temperature section and the palette only works for targets within the temperature section.

You can adjust the temperature range.

Steps

1. Select from the main menu.

2. Select auto adjustment or manual adjustment .

Auto Adjustment

Select , and press . The device adjusts temperature range

parameters automatically.

Manual Adjustment

Select , and press .

There are 2 ways to manually adjust the range:

● Adjust the temperature range based on selected area.

Tap on an interest area of the screen. A circle is displayed around

the area, and the palette readjusts to the temperature range of the

area.

● Adjust the maximum and minimum temperature of the range.

● Press or to select the max. temperature, min.

temperature, or both. You can also tap on the max. temperature

or min. temperature at the ends of the palette bar to select

them.

●

Press or adjust the temperature value. You can also tap

on the arrows on the right side of the screen to adjust the

temperature value.

3. Press to exit.

Note