Installation Guide

***Please read through this instruction manual BEFORE starting your project***

ASSEMBLY GUIDE

Spa Panel Restoration Kit

TOOLS

• Hammer

• Drill/Screwdriver

• Circular Saw

• Straight Edge

• Utility Knife

TIME REQUIRED

• 1-2 Hours

COMPONENTS

Part Description Qty

A Side Panels 8

B Flex Panel/Square Corners 4

C Trim Pieces 12

D Stainless Screws 72

E Stainless Grommets 72

F Highwood Badge 4

(B)

(C)

(A)

SPAKIT [3.1.13]

PAGE 1
ASSeMBLY GUIDe Spa panel Restoration Kit SPAKIT [3.1.
PAGE 2
Before you start This assembly can be done by one person alone, however it is much easier when two people work as a team. General Information The Highwood material in your kit is the world’s most advanced synthetic wood—providing you with a “New spa” look at a fraction of the new spa cost. This material can be used indoors or outdoors, is very durable, and colorfast, and will look good year after year with no more than routine cleaning.
PAGE 3
Step 3 Step 4 Install the Sidewalls Install the trim Strips First confirm that the length of the sidewall you removed from the spa is the same as the corners (some spas use different length boards on the corners than on the sidewalls). Once the cabinet height is determined, carefully measure, mark and cut all 8 panels for height ONLY. As before confirm the length of any trim strips you removed from the spa. Cut the provided trim to length using a circular saw as shown in Image #7.
PAGE 4
ENJOY YOUR HIGHWOOD SPA! Care and Cleaning Highwood products are ultra-low maintenance but for information on seasonal cleaning or to see a video that explains how to remove minor scratches visit http://www.highwood-usa.com/care.html Other Highwood items you may be interested in. Visit our Website and Facebook page to see more highwood® products! www.highwood-usa.com • www.facebook.