Owner manual

Q318.001

2008-2009 Suzuki

400 KingQuad Automatic

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ108

1 Main Jet DJ110

1 Main Jet DJ112

1 Main Jet DJ114

1 Main Jet DJ116

1 Main Jet DJ118

1 Main Jet DJ120

1 Main Jet DJ122

1 Main Jet DJ124

1 Fuel Needle DNO207

2 Adjusting Washers DW0001

1 E-Clip DE0001

1 Plug Drill DD 5/32

1 Screw DS0001

PAGE 1
Q318.001 2008-2009 Suzuki 400 KingQuad Automatic Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q318.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needle on groove #3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip (Fig.A). 3. Remove stock main jet and replace with Dynojet main jet provided. Use the DJ118 below 3000 feet, DJ114 from 3000 to 6000 feet and DJ110 above 6000 feet.