Tus neeg siv phau ntawv

23
ENGLISH
HIGH LEVEL INPUT
If your head unit does not have RCA preamp outputs, you can use the HIGH LEVEL INPUT. Connect
the loudspeaker cables of the head unit to the included cable harness.
16
AUTO TURN-ON
If your head unit does not have a turn-on signal (REM), you can use the automatic turn-on function of
the amplier. The amplier then detects a voltage rise to 6 volts when the head unit is turned on by a
so-called “DC offset” and then turns on the amplier. As soon as the head unit is switched off again,
the amplier switches itself off.
17
POWER/PROTECT
If the LED lights up in blue, the amplier is ready for operation. If the LED lights up in red, there is a
malfunction. Refer in this case to chapter TROUBLE SHOOTING on page 26.
14
CLIP LED
The CLIP LED lights up when the input signal is overloaded. Then turn the LEVEL controller (see sec-
tion 8) back accordingly until the LED goes out.
15
RL–
INPUT
POWER
PROTECT
RL+
INPUT
FL–
INPUT
FL+
INPUT
FR–
INPUT
FR+
INPUT
RR–
INPUT
RR+
INPUT
HIGH LEVEL
INPUT
SPEAKER
OUTPUT
LIMITED
POWER INPUT
FULL POWER INPUT
GND
+12V
GND
+12V
RR–
RR+
RL–
RL+
FR–
FR+
FL–
FL+
14 16
1715