User Manual

-13-
Microsoft Windows 2000 Operating System
"Start" "Setting" "Control Panel"
"Display"
"Settings" "Advanced.."
"Monitor"
"Driver" "Update Driver.." "Next"
"Display a list of the known drivers for this device so that I can choose a
specific driver" "Next" "Have disk"
"Browse"
"Open" "OK"
15" LCD "Next" "Next"
"Finish" "Close"
"Digital Signature Not Found" "Yes"
"Finish" "Close"
Microsoft Windows Millennium Operating System
"Start" "Setting" "Control Panel"
"Display"
"Settings" "Advanced Properties"
"Monitor"
"Change" "Monitor Type"
"Specify the location of the driver"
"Display a list of all the driver in a specific location.." "Next"
"Have Disk"
"OK"
"Show all devices" 15" LCD "OK"
"Close" "OK"
Microsoft Windows XP Operating System
"Start" > "Control Panel" "Appearance and Themes"
"Display" "Settings" "Advanced.."
"Properties" "Monitor" "Driver"
"Update Driver.." "Install from a list or.." "Next"
"Don't search ,I will.." "Next" "Have disk"
"Browse" 15" LCD "Next"
"Message" "Continue Anyway"
"OK"
"Close" "OK"
Microsoft Windows NT Operating System
Start, Settings Control Panel Display
All Display Modes
OK.
Apply
Note: All Display Modes,
1. Click , , .
2. Double click the Icon.
3. Choose the tab and then click .
4. Choose .
Case1: If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually
5. Click and then click on then click on the button.
6. Choose
then click and then click .
7. Click the button then choose A:.
8. Click the button, then click button.
9. Choose and click the button then click button.
10. Click the button then the button.
If you can see the window then click the button.
And click the button then the button.
1. Click , , .
2. Double click icon.
3. Select the tab and click button.
4. Select the tab.
5. Click the button in the area.
6. Choose .
7. Choose then click button.
8. Click the button
9. Specify A: then click button.
10. Select and choose and click .
11. Continue choosing button and button until you close the Display Properties
dialogue box.
(You can get some other screen for warning message or others, then click the appreciate option for
your monitor.)
1. Click then click the Icon.
2. Click icon and choose the tab then click .
3. Click the button on the tab and select tab.
4. Click and select then click button.
5. Select then click and then click .
6. Click the button then choose A: and choose and click the button.
7. If you can see following window, then click the button.
Then click button.
This monitor driver is not certified MS logo,and this installation don't damage your system.
8. Click the button then click button continually.
9. Monitor driver installation is completed.
1. Click , , and then double-click icon.
2. In Display Registration Information window, click Settings Tab and then click .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then
click
4. Click button if you see the screen working normally after clicking Test. If the screen is not
normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at select the level of resolution and vertical
frequency by referring to the Preset Display Modes in the user guide.
Installaion Guide for Video Driver