User's Manual

13
P: atmospheric pressure (unit: hPa)
T: temperature (unit:℃)
Under the “Hotkey” interface, press [2] or press [ENT]
when the focus is at “2.Tem-Press” to enter the “Input TP”
interface.
Input TP
20
Temp:
Press:
1013
PPM:
℃
hPa
1
0
1) Temp: temperature value, only need integer part,the
range is “-30℃” to “60℃”;
2) Press: Atmospheric pressure ,only need integer part,
the range is “500hpa” to “1400hpa”;
3) PPM: the value will be changed when the temperature
or pressure changed;
4) Press [ESC] back to the “Hotkey” interface without
saving the changed value.
3.4.3 Inputs of Note.
If you want to note simple information, this function can
help you. Under the “Hotkey” interface, press [3] or press [ENT]
when the focus is at “3.Note” to enter the “Input Note” interface.
Input Note
*[ENT] record
1
1) You can input notes by pressing [Mode] to switch the