User Manual

Chapter 7 Evaluation Software
- 102 - Hi-G-Tek Ltd. Micro electro nic s & A sset Tra cking Techno logy
4. If t he command is an addressed command or mult i-addressed command
(also called BMM List), you have to enter the Seal ID of the DataSeal
or DataSeals that you want to address in the Seals/Tags ID box. To
enter more than one Seal ID, enter each Seal ID on its own line.
5. Click the Command Execution button.
The results will be displayed in an hexadecimal format in the Re s pon se
box, and for some commands the result will be displayed also as a table or
as text.
You can also execute a command cyclically by clicking the Cyclic
Ex e c u ti on button instead of the Command Exe cution but ton. T o stop t he
cyclical execution click the Stop butt on. Using t he System Pause field you
can specify the pause in seconds between two interrogations in a cycle.
The Re a de r Ses sion field displays the duration in milliseconds of one
interrogation of the selected command. For some commands you can also
change this value. However, note that specifying lower value than the
default will usually cause an error.
When the command completes, the Resul t box indicates whether the
command succeeded or failed.
7.6 Specific Comm and Structures
Below is a description of the each one of the RF commands. For each
command its structure (Command Data) is given and also the structure of
t he response. Complete descript ions of the command argument s are given
in chapter 8.