Use and Care

GETTING STARTED WITH YOUR APPLIANCE

(CONTINUED)

OVEN RACKS

BURN HAZARD - To help prevent burns, never remove or reposition the oven racks when the oven

is in operation, or is cooling.

For safety considerations, NEVER cover any slots, holes, or passages in the oven bottom or cover an

entire oven rack with materials such as aluminum foil. Doing so blocks air flow through the oven

and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire

hazard.

PLACING THE OVEN RACKS

The oven features ladder racks on the left and right side of the oven with 6 positions. Choose

the rack position(s) that result in the best baking, roasting, etc. for your recipe. Rack position #3

(counting from the bottom-up) is the most popular position (vertical center location).

The racks feature full-extension, ball-bearing slides which require minimal maintenance.

ALWAYS REMOVE THE LADDER RACKS, OVEN RACKS, AND ALL OTHER ITEMS FROM THE

OVEN DURING THE SELF-CLEANING CYCLE.

1. Do not extend the slides - it is easier to install

the rack when NOT extended.

While raising the front of the rack slightly,

place the rear hook onto the desired ladder

rack, then slide the small tab under the ladder

as you flatten out the rack.

2. Continue sliding the rack back into the oven.

3. When you reach the front-most hook, slightly

lift the rack again to hook over the ladder.

Move the rack a few times in and out to

ensure it is locked into the ladders and will not

detach.