Instructions for Use

Herdio
Home Bluetooth In Ceiling/Wall Speakers(2 Pairs)
Dual Amplifier System Wiring Program
Bluetooth Operations
1) Make sure that each speaker wire is connected to the Bluetooth amplifier box and speaker
accordingly. The red speaker wire is connected to positive (+) on amplifier box and speaker, the
black speaker wire is to the ground (-) on amplifier box and speaker .Then insert the power AC
Adapter to the amplifier box Power Jack, Both sets are the same installation method.
2) When the wiring is all set, power on the two amplifier boxes, the two Bluetooth amplifier
boxes will automatically match and connected together, then one amplifier box will be
recognized as the active bluetooth amplifier box, the other one will be as the passive one
eversince. Next time, the active Bluetooth amplifier box will connect the passive Bluetooth
amplifier box automatically when both amplifier boxes are powered on.
3) Now you can Turn on the Bluetooth on your Bluetooth device, scan for the unit Bluetooth
Name “Herdio”, Click it to connect, play your favorite audio resouces, the 2 Bluetooth amplifier
boxes will work Simultaneously.
Note: -1 The installation distance between the two Bluetooth amplifier boxes cannot exceed
10m, and cannot be paired with each other beyond the Bluetooth signal range.
-2 You have to power off one amplifier box if you only need one amplifier box work.