Heltec Indoor Hotspot LoRaWAN & LongFi Support https://heltec.org Documents Rev 0.1 P 1 / 4 Apr.
Heltec Indoor Hotspot User Manual 1. Information Heltec Hotspot Miner features and benefits depend on Helium the people's network and its super stable connectivity enables all uses from Helium community have the ultimate experience on mining. The Heltec is an IOT products manufacturer and a passionate supporter of The People's Network officially approved by Helium.
2.2 Interface Interface Description Power Source Input x 1 5V DC. RJ45 Socket x 1 Ethernet connection. SMA Socket x 1 LoRa antenna with SMA socket. Anti-theft Lock Hole2 x 1 Fixing and anti-theft. Single trigger -- Network configuration via Helium APP; Button x 1 Long press -- System power off. Type C Socket x 1 Used to flash firmware during production. LED x 5 System status (Power, System, Miner Status, LoRa TX, LoRa Rx). 3.
Step 3 When you finish setting up the antenna, subsequently, plug in the adaptor to make sure the power is connected with the miner. As you can see here, please choose to use an internet cable (but you can use the WIFI also if you want) and there is also an antenna and the power cable. Once you do this you can see different lights on the device. First it is blue, if it is on, it means the Wi-Fi is connected with the device. Second it is Red, It is called LoRa TX light.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
