Owner manual

BATTERY REPLACEMENT

Remove battery compartment cover.

Remove discharged batteries.

Install (2) replacement CR2032 batteries. Please note that the

positive side of each battery should be on top.

Replace the battery compartment cover.

The gauge does not need re-calibration after the batteries have

been replaced.

STORAGE

If the gauge is not going to be used for a long time period, please

remove the batteries to prevent damage to the contacts.

SPECIFICATIONS

Operating Voltage: 3. 9~6VDC

Sleep Current: < 7uA

Low Voltage Protection: 4V±0.05

Detectable Pitch Range: -90° ~ 0 ~ +90° (Screen flashes warning)

Blade Chord Range: 15mm to 65mm

Current Consumption: < 4mA

Resolution: 0.1°