User's Manual

7
Remove machine screws
from the top (2 each side).
Remove screws and washers
from top back flange of top, 2
places on Sweetheart and 3
on Oval
Cabinet Bracket
Machine
Screw
Cabinet Assembly to Stove Top
Remember when working with the cabinet it is top heavy. Use your hand to support it during installation. Remove the cabinet
assembly from the top of the stove. Lift the cabinet assembly by the bracket area that is circled and set on the floor or a table top.
Unwrap the cabinet assembly.
Remove the washers and screws from the rear edge of the stove top. (2 places on sweetheart or 3 places on Oval. Also remove the
4 machine screws from the top of the stove top.
With a helper lift the cabinet assembly (by the circled bracket area and supporting the top of the cabinet) and place the cabinet into
position on the stove top (see diagram above). Line up the bracket holes with the 4 holes in the stove top while a helper supports
the cabinet.
Secure the cabinet to the stove top with the 4 machine screws and the 2 or 3 screws and washers. To prevent chipping do not
overtighten screws or use power tools.
Tool Rack- fasten
to rear of cabinet
using screws and
nuts provided.