Installation Guide

x2
19/32 x 3 x 26-5/8" (1,5 x 7,6 x 67,6 cm)
AH
x1
19/32 x 3 x 39-3/8" (1,5 x 7,6 x 100 cm)
GEA
19/32 x 3 x 72" (1,5 x 7,6 x 183 cm)
x1
ZJ
64
Fig. C
EAVE WALL R.H. DOOR - TRIM
PARTS REQUIRED:
3/4" (1,9 cm)
x33
ZJ
GEA
Nail into
framing.
Door
Trim
Fig. A
Door
Panel
3/4" (1,9 cm)
Screws from behind.
3/4" (1,9 cm)
Screws from behind.
2" (5,1 cm)
Finish Nails
x5
2" (5,1 cm)
Finish Nails
x4
You have  nished securing your DOOR TRIM.
FINISH
8
BEGIN
1
2
Secure door trim from inside using 3/4" screws as shown (Fig. A).
7
Center trim GEA over door and secure using four 2"  nish nails into framing as shown (Fig. C).
6
Flush ZJ with bottom of wall panel and door and secure using  ve 2"  nish nails into framing as shown.
Ensure 3/8" measurement as shown (Fig. C).
4
Reinforce the door trim using 3/4" screws through door panel into trim (Fig. A).
Locate screws as shown in Fig. B. Use two screws at seams.
x9
2" (5,1 cm)
3/8"
(1,0 cm)
CENTER CENTER
Flush
Flush
x1
19/32 x 2-1/2 x 51" (1,5 x 6,3 x 129,5 cm)
GPR
Attach upper horizontal door rail AH with four 3/4" screws from inside of door.
5
Attach lower horizontal door rail AH with four 3/4" screws from inside of door (Fig. B, C).
Attach GPR  ush to installed door trim AH with 3/4" screws from inside of door. (Fig. B).
3
Two Screws
11-1/2"
(29,2 cm)
11-1/2"
(29,2 cm)
AH
AH
AH
Fig. B
CENTER CENTER
GPR
INSIDE
OF
DOOR