Installation Guide

EAVE SIDE WALL WITH DOOR CENTERED

PARTS REQUIRED:

x68

2" (5,1 cm)

Fig. B

Fig. A

3/4"

(1,9 cm)

3/4"

(1,9 cm)

2 Nails

3/8 x 48 x 84"

(1 x 121,9 x 213,4 cm)

Place 48 x 84" panel onto wall frame ush to top of frame with primed side up as shown.

Use the gauge block to mark the 3/4" measurement on the wall stud. Secure panel with two 2" nails

in the corners (Fig. A).

Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.

Ensure your wall frame is square by installing one panel and squaring frame.

Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have

a 3/4" measurement on the wall stud. Secure corner with two 2" nails (Fig. B).

3/4" GAUGE

BLOCK

GAA

3/4" GAUGE

BLOCK

BEGIN HERE

Flush

Primed

side up

3/4"

(1,9 cm)

(15,2 cm)

12"

(30,5 cm)

For squareness maintain ush and

3/4" measurement along panel edge.