Installation Guide

18
58-1/4"
(148 cm)
5/8"
(16 mm)
2-1/2"
(6,4 cm)
Use
as spacer
Use Gauge Block
as spacer
3/4"
(19 mm)
Flush
58-1/4"
(148 cm)
21-1/2"
(54,6 cm)
29-1/2"
(75 cm)
Flush
1-1/4"
(3,2 cm)
2-1/2"
(6,4 cm)
1-1/4"
(3,2 cm)
12"
(30 cm)
6"
(15 cm)
BJ
Flush
LF
PT
RK temporary support
x17
1-1/2" (3,8 cm)
PARTS REQUIRED:
7
5
6
8
9
Use 1-1/2" (3,8 cm) nails only 6" (15 cm) apart.
Place PT flush to LF and panel edge. Hold the 58-1/4"
(148 cm) measurement and nail with 1-1/2" (3,8 cm)
nails 12" (30 cm) apart.
Place the 5/8" (16mm) spacer on PT.
Place BJ flush to spacer and nail.
Place 3/4" gauge block on PT.
Place LF flush on gauge block and nail.
Use only 1-1/2"
(3,8 cm) long nails
x1
2 x 3 x 96" (5 x 7,6 x 244 cm)
PT
2 x 3 x 29-1/2" (5 x 10 x 75 cm)
BJ
x1
2 x 3 x 21-1/2" (5 x 7,6 x 55)
x1
LF
5/8 x 3 x 14" (1,6 x 7,6 x 35,5 cm)
3/4" GAUGE
BLOCK
TEMPORARY SPACER
x1
LEFT WALL
Do not nail
in groove.