Installation Guide

50
20"
(51 cm)
WORKBENCH
PARTS REQUIRED:
Place workbench into gap in side wall upright. Nail
using 2" (5 cm) nails, as shown.
Level and attach KK to upright and workbench,
using four 3" (,6 cm) screws as shown (Fig. A).
You will secure your workbench ends later. Proceed to attach your pegboard.
2
3" (7,6 cm)
x10
x1
x1
x4
2 x 3 x 24-1/16" (5 x 7,6 x 61 cm)
KK
2" (5 cm)
Window
FINISH
3
Workbench
2" (5 cm)
Nails
3" (7,6 cm)
screws
KK
Fig. A
20"
(51 cm)
10-1/2"
Approximately
Angle top screw
to hit KK