Instructions / Assembly

caster (2 - locking ; 2 - non locking )
Step 5: Casters Assembly
Lay unit on its side. Use care to not scratch the unit. If necessary,
lay the unit on a floor mat or flattened cardboard sheets. If casters are
required, un-screw feet levelers from bottom poles, slide a plastic
bumper up the bottom of post about 4 in - 6 in, smooth side facing up.
Screw in two locking casters (d) on one side of the unit and two
non-locking casters (d) on the other side of the unit.
Double
line marking
Narrow side up
UPSIDE (level side)