Use and Care Manual
2 Tier Shelf Installation steps
Tools Recommended
1 – Philips Screwdriver / Philips head drill
1 – Measuring tape
1 – level
Parts needed
4 – Philips screws with anchors if necessary
Installation :
Step 1 - measure distance between each bracket while assembled of the wall
Step 2 - measure what height you want the shelve
Step 3- use level to make sure it will be even we attaching first bracket
Step 4 – then mount first first piece of the bracket make sure its secure
Step 5 - measure distance between first bracket mount and use the distance you used when measured assembled
off of the wall
Step 6 – once both brackets are measured and installed u can easily just slides in the shelves and the installation
Is complete