4 FOOT PRELIT DUMONT FIR Item # DCCT0409 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST • • • 1 EA. TREE STAND (WITH 3 SCREWS) 1 EA. TREE SECTION A (BOTTOM) 1 EA.
ASSEMBLY CAREFULLY REMOVE THE CONTENTS FROM THE CARTON. KEEP THE CARTON FOR FUTURE STORAGE. DO NOT FORCIBLY REMOVE CONTENTS. Step 1: Locate the TREE STAND. Rotate the legs until the three (3) holes on the inner and outer walls of the hub align, and the stand forms an “X” shape (see Fig. 1). There are three (3) screws with the stand. Insert the screws into the holes, but do not turn all the way in. Leave space inside the hub for the tree pole to slide down.
STORAGE PROPER TREE HANDLING AND STORAGE WILL HELP YOU GET THE MOST OUT OF YOUR TREE FOR MANY YEARS TO COME. 1. 2. 3. 4. 5. 6. Remove any ornaments and decorations that were added by you and did not come with the tree. Unplug the tree from the power source in your home and disconnect the plug connection between each tree section. Starting with the top, separate each tree section and stand gently, being sure not to roughly handle as it could cause damage to the parts.
15. 16. 17. 18. Do not cover the tree with cloth, paper, or any material not part of the tree when in use. Do not mount or support strings in a manner that can cut or damage the wire insulation. Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat. Do not place your tree where it is likely to wobble due to uneven floors or thick carpeting. Place tree on a level, hard, flat surface. 19. This product should not be used with a voltage converter.
