HOOPS DUAL ELECTRONIC BASKETBALL GAME ASSEMBLY INSTRUCTIONS NG2237BL
THANK YOU! Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare instance that your product is defective or missing parts, contact Challenger Manufacturing at 800-759-0977 to submit parts requests or warra nty claims. Please read the warranty information at the back of these assembly instructions for further details.
PARTS IDENTIFIER (NOT TO SCALE) Please see Parts List at end of manual for part number when ordering parts. For replacement parts please call 800-759-0977.
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your game. The game will be partially assembled upside down and then turned over onto its legs. This is a heavy game and turning it over will require at least two strong adults. 2. Remove all of the contents from box and verify that you have all of the parts shown on the Note: Some parts may be pre-installed or preassembled. stand the text before beginning each assembly step. 4.
ASSEMBLY INSTRUCTIONS 1. Attach ELECTRONIC SCOREBOARD #21 to the back of the BACKBOARD #17 with 20mm x 5mm BOLT #25, FLAT WASHER #36 and LOCKNUT #32. Attach the sensors to the back of the BACKBOARD as shown with 3/4” SCREW #29. 2. Attach each RIM with NET #18 to the front of the BACKBOARD as shown with 20mm x 6mm BOLT, SUPPORT PLATE #19, FLAT WASHER #30 and LOCKNUT #31.
ASSEMBLY INSTRUCTIONS (CONT.) 3. Begin Rear Frame Assembly by connecting one REAR BOTTOM LEG #3 to each side of the REAR BASE #4 – push buttons lock into place. Connect one REAR MIDDLE LEG #2 to each REAR BOTTOM LEG #3 – push buttons lock into place. Connect one REAR TOP LEG #1 to each REAR MIDDLE LEG #2. 4. Attach the assembled BACKBOARD to the REAR TOP LEG #1 with 45mm BOLT #27, FLAT WASHER #30 and LOCKNUT #31.
ASSEMBLY INSTRUCTIONS (CONT.) 6. Begin Center Frame Assembly by connecting one CENTER MIDDLE LEG #8 to each side of CENTER BASE #9. Connect one CENTER TOP LEG #7 to each CENTER MIDDLE LEG #8 – push buttons lock into place. 7. Attach one CENTER TOP LEG #7 to each REAR MIDDLE LEG #2 with 35mm BOLT #24, FLAT WASHER #30 and LOCKNUT #31. 8. Attach one BACK ARM #6 to each REAR BOTTOM LEG #3 as shown with 35mm BOLT #24, FLAT WASHER #30 and LOCKNUT #31.
ASSEMBLY INSTRUCTIONS (CONT.) 9. Continue Front Arm Assembly by attaching one MIDDLE ARM #10 to the bracket on the end of each BACK ARM #6 with 40mm BOLT #28, FLAT WASHER #30 and LOCKNUT #31. Attach one FRONT ARM #11 to the end of each MIDDLE ARM #10 with 35mm BOLT #24, FLAT WASHER #30 and LOCKNUT #31. [Note: Push buttons should face inward.] Attach one HINGE #12 (with hinge folding down) to each MIDDLE ARM #10 and FRONT ARM #11 with 35mm BOLT #24, FLAT WASHER #30 and LOCKNUT #31.
ASSEMBLY INSTRUCTIONS (CONT.) 10. Slide LEAN BAR #13 through the front opening in BALL RETURN NET #16. Connect each end of the LEAN BAR #13 to each FRONT ARM #11 – push buttons lock into place. 11. Slide BALL RETURN NET #16 over the REAR TOP LEGS #1 as shown. Wrap lower straps around RETAINING HOOKS #15 on the back of the BACKBOARD to tighten. Clip straps together around REAR MIDDLE POLE #2. 12.
CONGRATULATIONS! You have now assembled your Basketball Game. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only. 2. Do NOT sit, climb or lean on the game. 3. To inflate the basketballs, first remove the needle from the storage compartment in the pump handle and thread it into the end of the pump. Moisten needle before inserting into the basketball. Inflate basketball to desired size.
90-DAY LIMITED WARRANTY This Challenger Manufacturing product is warranted to the original purchaser to be free from defects in material or work manship for a period of ninety days from the date of the original retail purchase. This warranty does not cover defects or damage due to improper installation, alteration, accident or any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, abuse or negligence will void this warranty.
PARTS LIST NG2237BL Product NGP5620 NGP5621 NGP5622 NGP5623 NGP5624 NGP5625 NGP5626 NGP5627 NGP5628 NGP5629 NGP5630 NGP5631 NGP5632 NGP5633 NGP5634 NGP5635B NGP5636B NGP5637 NGP5638 NGP5639 NGP2217 NGP5640 NGP5641 NGP5642 NAME: Descrip on REAR TOP LEG REAR MIDDLE LEG REAR BOTTOM LEG REAR BASE REAR CROSS BASE BACK ARM CENTER TOP LEG CENTER MIDDLE LEG CENTER BASE MIDDLE ARM FRONT ARM HINGE LEAN BAR FRONT CROSS BRACE RETAINING HOOK BALL RETURN NET BACKBOARD RIM WITH NET SUPPORT BRACE ELECTRONIC SCOREBOARD B
