Prepare the pieces Step Instar the wooden dowels {G) Into parts 02, 03 and D6. Ra member to use th glue (Q). il WHITE GLUE| A #'s important 1o glue ‘the wooden dowel. Step 2 Insert the wooden dowels [G) Into parts 04, 08 and 09, Ram amber to use tha glue (Q). Rial 0. WHITE Glue A 'z important to glue GEX30MM SODDEN the wooden dowel. DOWEL Step 3 Insert screw B Into part 05, Titan to the flimflam. D——ww BIMINI SCREW.
Step Instar screw B Into parts 12, 13 and 14. Tighten to the limit.
Assembly Step Put the parts 01 and 02 together and use two resews (E} and the Allan wrench (F). Step 6 Put the slug (Q) in the wooden dowel (G} already fixed Into part 04, Then put part 04 together with part 02. 1t Important to ghe the wooden dowse, WHITE GLUE| W Step 7 Fitted part 03 the parts 01 and 04. Fit the parts the screws (E) and the Allen key (F). Sl " —comm s important o ghe the wooden dowel.
Assembly Step 08 i Put tha part 06 ta the screws airspeed fad to part 05. Insert the two mini fix ‘connectors (C) In part 06 and rotate clockwise as shown. Tighten to the limit. Instar the hols cap (D} ova the minimum connectors {C). 2 534 screwworm CUR NN Tighten the muffin up ta the fEi tn assembly rod's be sink. Step 09 Fit part 05 on the sides 02 and 03, Insert the four mint fix connectors {C) on parts 02 and 03 according to the Indicated drawing and ‘tum dock wise. Tighten to the limit.
Assembly Step 11 Insert the craw 1) through parts 02 and 03 according to the drawing using the Allen wrench {F). The screw (1) must fix parts 02 and 03 on tha fat (N). == | [ F-ALLEN WRENCH | | 1/4X25MM SCREW X . Step 12 Fix the corner plats (1) on the part 17 and use four screws {S). Tighten Botha milk. || (o) Step 13 Allen the corner plate (1) which is fled on the part 17 with the markings an parts 02 and 03, Then fix the comer plate with twa screws {S). Do this on the right and lef side of the product.
Assembly Step 14 Fix the back 18 to tha bottom of the dresser using the balls (P). Than fit tha profile (0) Into the upper part of this back{18). Then, Insert the second back 13 Into the profile {O) and fix t with balls When It s ok, fix tha back 07 at tha top of the batten, as shown In the drawing. ) — / v-sonar || o-coroner @ Drawers Step 15 Fit the pieces 08 and 09 on 12/13/14 parts. Insert two infix connectors {C) on parts 08 and 09 as shown and rotate clockwise. Tighten to the limit.
Drawers Step 21 Inge rt the drawers on the Vertical Dresser. Make sure the drawers are firmly seated. A 1o drywall 1 you fix the dresser on the DRYWALL don’t put the drawers. A 70 masonry 1o fix the tireless on the MASONRY WALL you should put the drawers.
Safe and Security KIT FOR DRYWALL ow-avowal [ KIT FOR MASONRY 1w masonry wa, G0 to Step 30 WARNING Serous or fatal crushing Injures can occur from future tip-over. ALWAYS secure this furniture to the wall using tip-aver restraints. To further reduce the risk of serous Injury and death from tip-overs: not set TVs or other heavy objects on the top of this product. Never allow children to climb or hang on drawers doors or shelves, DON'T PULL THE FURNITURE TO CHANGE [T.
Safe and Security KIT FOR DRYWALL 1. Make holes on the wall following the model below and specifications: Step 22 -8 14mm dell. ¥ Depth of 60mm Use an electric drill. 2. Separate the two nylon parts of the device. Step 23 3. Fold the metal part as shown blew. Step 24 DW1 KIT FOR DRYWALL ruk 4. Insert the device Into the hole made on the drywall.
Safe and Security 5. As the device Inserted Into the drywall pull the nylon pieces as below and fitting the two parts. 6. Lust the metal part detached to the hole made on the drywall. For this necessary to pull the handle on the copacetic direction. AFTER DWL.
Safe and Security 8. Put the dresser to the wall and aligning the hole In the Step 29 safety block with the hole that was mad the drywall. Done so, insert the screw up ta its maximum limit on, KIT FOR MASONRY 1. Make holes on the wall following the model below and specifications: Step 30 & 8mm (5/167} dill ¥ Depth of 50mm Use an electric drill. Step 31 2.
Safe and Security 3.Put the screws Into the bushings. Step 32 MW4 +MW2 4, Put the lock on the horizontal as the pictures below. Step 33 Check tha distance between wales holes. 5. Drag the dresser carefully until you meet the screw’s head. Step 34 Fit the screw into the Inc as the picture he law. Put the two pieces together and Insert the seal.
TAKING GOOD CARE OF YOUR FURNITURE Cleaning and caring Instructions: Wipe the wood furniture down with a moist cloth to properly clean the furniture. Do not forget to dry your furniture out. Humidity can damage the finish or create mold.