User's Manual
Table Of Contents
- 1. REGULATORY AND SAFETY INFORMATION
- 2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ
- 3. CLEANING
- 4. BATTERIES
- 5. INTRODUCTION
- 6. OPTIONS AND ACCESSORIES
- 7. EDACS, CONVENTIONAL, AND P25 OPERATION
- 7.1 TURNING ON THE RADIO
- 7.2 CONTROLS
- 7.3 DISPLAY
- 7.4 TRI-COLOR LED
- 7.5 RADIO STATUS MESSAGES
- 7.6 ERROR MESSAGES
- 7.7 ALERT TONES
- 7.8 VOICE ANNUNCIATION
- 7.9 SYSTEM/ZONE SELECTION
- 7.10 GROUP/CHANNEL SELECTION
- 7.11 MODIFY SCAN LIST
- 7.12 MENU
- 7.13 BLUETOOTH
- 7.14 BACKLIGHT ADJUST
- 7.15 CONTRAST ADJUST
- 7.16 DECLARE AN EMERGENCY
- 7.17 LOCKING/UNLOCKING KEYPAD
- 7.18 HIGH/LOW POWER ADJUSTMENT
- 7.19 ENCRYPTION
- 7.20 SCAN OPERATION
- 7.21 SCANNING TRUNKED SYSTEMS
- 7.22 EMERGENCY OPERATION
- 7.23 MIXED SYSTEM ZONES
- 7.24 CALLER ID
- 7.25 STEALTH MODE
- 7.26 INDIVIDUAL CALLS
- 7.27 TELEPHONE INTERCONNECT CALLS
- 7.28 PRE-STORING INDIVIDUAL AND TELEPHONE INTERCONNECT CALLS FROM THE KEYPAD
- 7.29 STATUS/MESSAGE OPERATION
- 7.30 DYNAMIC REGROUP OPERATION (EDACS)
- 7.31 MACRO KEY OPERATION
- 7.32 DATA COMMUNICATIONS
- 7.33 SELECTIVE SIGNALING (CONVENTIONAL)
- 7.34 RADIO TEXTLINK OPERATION
- 7.35 VIEW GPS INFORMATION
- 8. OPENSKY OPERATION
- 8.1 CONTROLS
- 8.2 TRI-COLOR LED
- 8.3 LOGIN TO THE NETWORK
- 8.4 LOG OFF THE NETWORK
- 8.5 PERSONALITY
- 8.6 OPENSKY DISPLAY OVERVIEW
- 8.7 ALERT TONES
- 8.8 BASIC MENU STRUCTURE
- 8.9 BLUETOOTH
- 8.10 ERROR MESSAGES
- 8.11 KEYPAD FUNCTION COMMANDS (SYSTEM MODEL ONLY)
- 8.12 QUICK KEYS (SYSTEM MODEL ONLY)
- 8.13 LOCK/UNLOCK THE KEYPAD
- 8.14 DUAL-TONE MULTI-FREQUENCY (SYSTEM MODEL ONLY)
- 8.15 CHANGING THE ACTIVE PROFILE
- 8.16 CHANGING THE SELECTED TALK GROUP
- 8.17 ADJUSTING DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS
- 8.18 STEALTH MODE
- 8.19 ADJUSTING SIDE TONE AUDIO LEVEL
- 8.20 CHANGE OPERATING MODE
- 8.21 RECEIVING AND TRANSMITTING VOICE CALLS
- 8.22 ADJUSTING AUDIO TREBLE LEVEL
- 8.23 TALK GROUP LOCK OUT
- 8.24 SCANNING
- 8.25 MAKING SELECTIVE CALLS
- 8.26 SELECTIVE ALERTS
- 8.27 MAKING INTERCONNECT CALLS (SYSTEM MODEL ONLY)
- 8.28 EMERGENCY COMMUNICATIONS
- 8.29 OPENSKY ENCRYPTION
- 8.30 STATUS MESSAGES
- 8.31 REQUEST TO TALK (RTT) MESSAGES
- 8.32 SITE LOCK
- 8.33 GPS COORDINATES
- 8.34 V-TAC OPERATION
- 9. MARITIME FREQUENCIES
- 10. BASIC TROUBLESHOOTING
- 11. CUSTOMER SERVICE
- 12. WARRANTY
- APPENDIX A - CONFIGURING ENCRYPTION
14221-1500-2000, Rev. K
95
5. Press or to edit the right-most digit and press to advance to the next digit. Repeat until the
desired channel is entered.
6. The radio then prompts the user to edit the band. Table 8-12 lists valid bands and their definitions.
Press or to edit the number assigned to the frequency band and press to confirm and enter
the SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.
SOI Mode, Pre-Programmed Channel Selection (All XG-25P Models)
1. Press or until the Client Mode menu appears.
2. Press or until SOI is displayed.
3. Press to confirm mode selection.
4. Press or scroll through a list of pre-programmed channels.
5. Press to confirm channel and enter SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.
Table 8-12: Band Definitions
RF BAND
RF CHANNEL NUMBER
0 = SMR
Band 0: 1-830
1 = AMPS
Band 1: 1-600
2 = BORDER
Band 2: 1-600
3 = 700 MHz Band 1
Band 3: 1-477
4 = 700 MHz Band 2
Band 4: 481-957
5 = 700 MHz Band 3
Band 5: 1-477
6 = 700 MHz Band 4
Band 6: 481-957
7 = 900 MHz
Band 7: 1-399
8 = 800 MHz Rebanded
Band 8: 1-830
9 = 400 MHz T band WB
Band 9: 1-6718
(Independent Separation Between TX and RX)
10 = 400 MHz T band NB
Band 10: 1-6718
(Independent Separation Between TX and RX)
11 = 400 MHz T band Temp (NYPD only)
Band 11: 1-120
14 = 700 MHz reband WB
Band 14: 1-957
15 = 700 MHz reband NB
Band 15: 1-959