User's Manual
Table Of Contents
- 1. REGULATORY AND SAFETY INFORMATION
- 2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ
- 3. CLEANING
- 4. BATTERIES
- 5. INTRODUCTION
- 6. OPTIONS AND ACCESSORIES
- 7. EDACS, CONVENTIONAL, AND P25 OPERATION
- 7.1 TURNING ON THE RADIO
- 7.2 CONTROLS
- 7.3 DISPLAY
- 7.4 TRI-COLOR LED
- 7.5 RADIO STATUS MESSAGES
- 7.6 ERROR MESSAGES
- 7.7 ALERT TONES
- 7.8 VOICE ANNUNCIATION
- 7.9 SYSTEM/ZONE SELECTION
- 7.10 GROUP/CHANNEL SELECTION
- 7.11 MODIFY SCAN LIST
- 7.12 MENU
- 7.13 BLUETOOTH
- 7.14 BACKLIGHT ADJUST
- 7.15 CONTRAST ADJUST
- 7.16 DECLARE AN EMERGENCY
- 7.17 LOCKING/UNLOCKING KEYPAD
- 7.18 HIGH/LOW POWER ADJUSTMENT
- 7.19 ENCRYPTION
- 7.20 SCAN OPERATION
- 7.21 SCANNING TRUNKED SYSTEMS
- 7.22 EMERGENCY OPERATION
- 7.23 MIXED SYSTEM ZONES
- 7.24 CALLER ID
- 7.25 STEALTH MODE
- 7.26 INDIVIDUAL CALLS
- 7.27 TELEPHONE INTERCONNECT CALLS
- 7.28 PRE-STORING INDIVIDUAL AND TELEPHONE INTERCONNECT CALLS FROM THE KEYPAD
- 7.29 STATUS/MESSAGE OPERATION
- 7.30 DYNAMIC REGROUP OPERATION (EDACS)
- 7.31 MACRO KEY OPERATION
- 7.32 DATA COMMUNICATIONS
- 7.33 SELECTIVE SIGNALING (CONVENTIONAL)
- 7.34 RADIO TEXTLINK OPERATION
- 7.35 VIEW GPS INFORMATION
- 8. OPENSKY OPERATION
- 8.1 CONTROLS
- 8.2 TRI-COLOR LED
- 8.3 LOGIN TO THE NETWORK
- 8.4 LOG OFF THE NETWORK
- 8.5 PERSONALITY
- 8.6 OPENSKY DISPLAY OVERVIEW
- 8.7 ALERT TONES
- 8.8 BASIC MENU STRUCTURE
- 8.9 BLUETOOTH
- 8.10 ERROR MESSAGES
- 8.11 KEYPAD FUNCTION COMMANDS (SYSTEM MODEL ONLY)
- 8.12 QUICK KEYS (SYSTEM MODEL ONLY)
- 8.13 LOCK/UNLOCK THE KEYPAD
- 8.14 DUAL-TONE MULTI-FREQUENCY (SYSTEM MODEL ONLY)
- 8.15 CHANGING THE ACTIVE PROFILE
- 8.16 CHANGING THE SELECTED TALK GROUP
- 8.17 ADJUSTING DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS
- 8.18 STEALTH MODE
- 8.19 ADJUSTING SIDE TONE AUDIO LEVEL
- 8.20 CHANGE OPERATING MODE
- 8.21 RECEIVING AND TRANSMITTING VOICE CALLS
- 8.22 ADJUSTING AUDIO TREBLE LEVEL
- 8.23 TALK GROUP LOCK OUT
- 8.24 SCANNING
- 8.25 MAKING SELECTIVE CALLS
- 8.26 SELECTIVE ALERTS
- 8.27 MAKING INTERCONNECT CALLS (SYSTEM MODEL ONLY)
- 8.28 EMERGENCY COMMUNICATIONS
- 8.29 OPENSKY ENCRYPTION
- 8.30 STATUS MESSAGES
- 8.31 REQUEST TO TALK (RTT) MESSAGES
- 8.32 SITE LOCK
- 8.33 GPS COORDINATES
- 8.34 V-TAC OPERATION
- 9. MARITIME FREQUENCIES
- 10. BASIC TROUBLESHOOTING
- 11. CUSTOMER SERVICE
- 12. WARRANTY
- APPENDIX A - CONFIGURING ENCRYPTION
14221-1500-2000, Rev. K
79
Lock out is a listening (receive) function and only blocks received calls on locked out talk
groups. Lock out does not affect transmit capability. “No Scan” and “Lock Out” do not
apply to recent emergency lock outs.
Only talk groups in the active profile can be locked out, since they are the only talk groups whose voice
calls can be heard on the radio. Talk group lock out is a scan-related feature. With lock out, one or more
talk groups in the active profile can be temporarily disabled from being scanned. Calls are not received
on locked-out talk groups. Lock out settings are not retained between profile changes.
P1, P2, and P3 groups CANNOT be locked out.
The default emergency and emergency-capable talk groups can be locked out if they are NOT in an
emergency state. If a talk group is locked out and is subsequently changed to the currently selected talk
group, it will automatically be unlocked by the radio so the user can hear calls on the talk group. The
radio may be configured so all talk groups are automatically locked out by default. In this case, they must
be manually unlocked, if desired.
8.23.1 Lock Out a Talk Group
1. Use the or buttons to scroll through the menu choices until “LockOutMenu” appears in the
display.
2. Use the or keys to scroll through the list of talk groups, if any, until the user group you want to
lock out appears in the display.
3. Press the key to select the lockable talk group.
4. “<” appears next to the locked out talk group.
8.23.2 Unlock a Talk Group
1. Use the or buttons to scroll through the menu choices until “LockOutMenu” appears in the
display.
2. Use the or keys to scroll through the list of talk groups, if any, until the user group you want to
unlock appears in the display.
3. Use the key to unlock the displayed talk group.
• Changing the active profile removes any lockouts you have made.
• Turning off the radio removes any lockouts you have made.
8.24 SCANNING
8.24.1 Selecting Scan Modes
Three scanning modes are available for the radio, but only one can be active at any time. Changing the
scanning mode changes the way the radio scans voice calls for all of the profiles in the radio personality,
no matter which profile is or becomes active.
NOTE
NOTE
NOTE