User's Manual
Table Of Contents
- 1. REGULATORY AND SAFETY INFORMATION
- 2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ
- 3. CLEANING
- 4. BATTERIES
- 5. INTRODUCTION
- 6. OPTIONS AND ACCESSORIES
- 7. EDACS, CONVENTIONAL, AND P25 OPERATION
- 7.1 TURNING ON THE RADIO
- 7.2 CONTROLS
- 7.3 DISPLAY
- 7.4 TRI-COLOR LED
- 7.5 RADIO STATUS MESSAGES
- 7.6 ERROR MESSAGES
- 7.7 ALERT TONES
- 7.8 VOICE ANNUNCIATION
- 7.9 SYSTEM/ZONE SELECTION
- 7.10 GROUP/CHANNEL SELECTION
- 7.11 MODIFY SCAN LIST
- 7.12 MENU
- 7.13 BLUETOOTH
- 7.14 BACKLIGHT ADJUST
- 7.15 CONTRAST ADJUST
- 7.16 DECLARE AN EMERGENCY
- 7.17 LOCKING/UNLOCKING KEYPAD
- 7.18 HIGH/LOW POWER ADJUSTMENT
- 7.19 ENCRYPTION
- 7.20 SCAN OPERATION
- 7.21 SCANNING TRUNKED SYSTEMS
- 7.22 EMERGENCY OPERATION
- 7.23 MIXED SYSTEM ZONES
- 7.24 CALLER ID
- 7.25 STEALTH MODE
- 7.26 INDIVIDUAL CALLS
- 7.27 TELEPHONE INTERCONNECT CALLS
- 7.28 PRE-STORING INDIVIDUAL AND TELEPHONE INTERCONNECT CALLS FROM THE KEYPAD
- 7.29 STATUS/MESSAGE OPERATION
- 7.30 DYNAMIC REGROUP OPERATION (EDACS)
- 7.31 MACRO KEY OPERATION
- 7.32 DATA COMMUNICATIONS
- 7.33 SELECTIVE SIGNALING (CONVENTIONAL)
- 7.34 RADIO TEXTLINK OPERATION
- 7.35 VIEW GPS INFORMATION
- 8. OPENSKY OPERATION
- 8.1 CONTROLS
- 8.2 TRI-COLOR LED
- 8.3 LOGIN TO THE NETWORK
- 8.4 LOG OFF THE NETWORK
- 8.5 PERSONALITY
- 8.6 OPENSKY DISPLAY OVERVIEW
- 8.7 ALERT TONES
- 8.8 BASIC MENU STRUCTURE
- 8.9 BLUETOOTH
- 8.10 ERROR MESSAGES
- 8.11 KEYPAD FUNCTION COMMANDS (SYSTEM MODEL ONLY)
- 8.12 QUICK KEYS (SYSTEM MODEL ONLY)
- 8.13 LOCK/UNLOCK THE KEYPAD
- 8.14 DUAL-TONE MULTI-FREQUENCY (SYSTEM MODEL ONLY)
- 8.15 CHANGING THE ACTIVE PROFILE
- 8.16 CHANGING THE SELECTED TALK GROUP
- 8.17 ADJUSTING DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS
- 8.18 STEALTH MODE
- 8.19 ADJUSTING SIDE TONE AUDIO LEVEL
- 8.20 CHANGE OPERATING MODE
- 8.21 RECEIVING AND TRANSMITTING VOICE CALLS
- 8.22 ADJUSTING AUDIO TREBLE LEVEL
- 8.23 TALK GROUP LOCK OUT
- 8.24 SCANNING
- 8.25 MAKING SELECTIVE CALLS
- 8.26 SELECTIVE ALERTS
- 8.27 MAKING INTERCONNECT CALLS (SYSTEM MODEL ONLY)
- 8.28 EMERGENCY COMMUNICATIONS
- 8.29 OPENSKY ENCRYPTION
- 8.30 STATUS MESSAGES
- 8.31 REQUEST TO TALK (RTT) MESSAGES
- 8.32 SITE LOCK
- 8.33 GPS COORDINATES
- 8.34 V-TAC OPERATION
- 9. MARITIME FREQUENCIES
- 10. BASIC TROUBLESHOOTING
- 11. CUSTOMER SERVICE
- 12. WARRANTY
- APPENDIX A - CONFIGURING ENCRYPTION
14221-1500-2000, Rev. K
76
2. Use or to scroll through the list of available profiles.
3. Profile becomes active when selected for longer than 2 seconds, when the is pressed, or when the
menu is changed using the or
button. Press to activate the selected profile.
8.16 CHANGING THE SELECTED TALK GROUP
Each profile stored in the radio can have up to 16 talk groups. One talk group within the currently active
profile is set as the “selected talk group.” To change the selected talk group, turn the Group Selection
knob on top of the radio or use the Talk Group selection menu.
8.17 ADJUSTING DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS
1. Press the or buttons until Bright Menu is displayed.
2. Use or to brighten or dim the display and button backlighting.
8.18 STEALTH MODE
For some users, it is important to be able to turn off the radio’s display lights and side tones, but not the
radio traffic. For example, in covert operations, lights and sounds could inadvertently expose an
otherwise unobservable radio user. For this purpose, the radio has a Stealth feature that disables the radio
display lights, indicator lights, audible alert, and side tones.
When Stealth Mode is on, the radio continues to scan the programmed list of talk groups and the user can
key-up on the selected talk group.
8.18.1 Enabling Stealth Mode
System Model Only: Quick Key combination 2# toggles Stealth Mode on and off.
System and Scan Models:
Press the or buttons to scroll through menus until “StealthMenu”
appears in the display. To immediately activate Stealth Mode press the or button once. This
activates Stealth Mode, exits the Stealth Menu, and returns to the Dwell Display.
The display lights, indicator lights, and side tones are disabled. The stealth mode icon is displayed.
8.18.2 Disabling Stealth Mode
System Model Only: To re-enable all lighting, side tones and exit Stealth Mode, press Quick Key
combination 2# again. The radio returns to the Dwell Display.
Stealth Mode can also be disabled by using the Stealth Menu.
Scan Model Only: To re-enable all lighting, side tones and exit Stealth Mode, press any key other than
PTT or Emergency. The radio returns to the Dwell Display.
The display lights, indicator lights, and side tones are re-enabled. The stealth mode icon disappears.
NOTE