User Manual

ManualsBrandsHARRIS ManualsElectronics800 MHz P5500, 800 MHz P5300

14221-1400-2000

9.9 SYSTEM SELECTION

METHOD 1: From the control knob: If system selection is programmed to the

Voice Group

Selection control knob

, select a system by turning the knob to the desired system

number position (1-16). The display registers the new system name on line one.

The

button can be programmed to provide access to a “2

bank” of 16 system number

positions (17-32).

METHOD 2: From the keypad: If system selection is programmed as the primary function of

and select a system by pressing or to scroll through the system list.

The

display registers the new system name on line one.

METHOD 3: (P5570 model radios only) Direct Access: Press

to enter the system select mode.

Press the numeric key, which is mapped to the desired system. Press .

The radio

will move to the selected system.

NOTE

If system selection is programmed to the Voice Group Selection control knob, direct

access to systems will not be available. Pressing or will scroll through

different sets of 16 systems each (banks) if more than 16 systems are programmed into

the radio. The systems within each bank are then selectable via the Voice Group

Selection control knob as described previously in METHOD 1.

Example:

System: 1 = North Group: 1 = Group 1

2 = South 2 = Group 2

3 = East 3 = Group 3

4 = West 4 = Group 4

1. Press

. (South is the currently selected system.)

2. Press

. (Press 4 to select “West” system.)

3. Press

. (West is the newly selected system.)

9.10 GROUP/CHANNEL SELECTION

Several methods can be used to select a new group or channel.

METHOD 1:

From the Control knob: If group selection is programmed to the Voice Group Selectio

control knob, select a group by turning the Voice Group Selection control knob

to the

desired group number position. The display registers the new group name on line two.

If the knob is moved to a position greater than the number of programmed groups, th

highest programmed group will remain selected. The

button can be programmed to

provide access to a “2

bank” of 16 group number positions (17-32).

METHOD 2: From keypad: If group selection is programmed as the primary function of and

select a group by pressing or

to scroll through the group list. The display

registers the new group name on line two.

METHOD 3: (P5570 model radios only) Direct Access: Press

to enter the group select mode.

Press the numeric key mapped to the desired group. Press .

The radio will move to

the selected group.