User Manual

14221-1400-2000
54
4. The radio reverts to the dwell display. If accepted, you will be switched off the network, and be
communicating locally through the V-TAC.
Press *40# or use the Client Mode menu to return to normal operation (Network Mode). The personality
and profile in use at the time the radio entered SOI mode is restored.
SOI Mode, Manual Channel Entry (All P5500 Models)
1. Press or until the Client Mode menu appears.
2. Press
or until SOI is displayed.
3. Press
to confirm mode selection.
4. Press
or until “Manual Select Chan” is displayed and press .
5. Press
or to edit the right-most digit and press to advance to the next digit. Repeat until the
desired channel is entered.
6. The radio then prompts the user to edit the band. Table 8-12 lists valid bands and their definitions.
Press
or to edit the number assigned to the frequency band and press to confirm and enter
the SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.
SOI Mode, Pre-Programmed Channel Selection (All P5500 Models)
1. Press or until the Client Mode menu appears.
2. Press
or until SOI is displayed.
3. Press
to confirm mode selection.
4. Press
or scroll through a list of pre-programmed channels.
5. Press
to confirm channel and enter SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.