User's Manual

MM102554V1 REV B
14
This manual is divided into the following chapters:
1. Regulatory and Safety Information – This chapter provides critical safety information governing
the installation and operation of the base station.
2. Specifications – This chapter provides the specifications for a typical conventional base station
installed in a 37" or 69" cabinet.
3. Introduction - This chapter provides a brief introduction on how this manual is structured.
4. General Information – This chapter lists many of the options and other technical manuals, which
may affect the installation of this base station.
5. Site Preparation - This chapter identifies site requirements and installation practices for the antenna
tower, transmission lines, and the equipment shelter.
6. Equipment Installation - This chapter provides instructions for unpacking and physically installing
the electronic equipment cabinets.
7. DC and Tone Remote Control Installation – This chapter provides information for configuring the
base station for operation with a DC or Tone Remote Control system.
8. Base Station Test and Alignment Procedures – This chapter provides detailed instructions for
testing and aligning each of the individual system components.
9. System Functional Tests - This chapter provides detailed instructions for verifying the overall
operation of the equipment as a system.
10. Module Testing and Alignment - This chapter provides details for bench testing or aligning
individual modules or testing and aligning the modules “in-station.” It also provides procedures for
changing the base station frequency.
11. Preventative Maintenance - This chapter defines those tests to be performed as part of Periodic
Preventative Maintenance.
12. Checklists – This chapter includes support features, such as Installation and Preventative
Maintenance Checklists.