SDS

ManualsBrandsHarris ManualsCleaning128 oz. Mildew and Mold Stain Remover

SDS – MIL-X Mildew & Mold Stain Remover Page 1

SAFETY DATA SHEET

Mildew & Mold Stain Remover

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Mildew & Mold Stain Remover

Product Code(s): MILX-32, MILX-128

Other means of

Identification:

Recommended Use: Sodium Hypochlorite Cleaner

Manufacturer/Marketer:

P.F. Harris Manufacturing Company, LLC

P.O. Box 1922

Cartersville, GA 30120

Email: info@pfharris.com

www.pfharris.com

Customer Service: 1-800-637-0317

Monday-Friday, 9am – 5pm EST

Emergency:

National Poison Control: 1-800-222-1222

24 hour Emergency Telephone: 1-800-255-3924

SECTION 2. HAZARDS IDENTIFICATION

OSHA Regulatory Status:

This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

HAZARDS CLASSIFICATION:

Skin Corrosion/Irritation – Category 2

Eye Damage/Irritation - Category 2A

Corrosive to Metals – Category 1

SIGNAL WORD: WARNING

GHS HAZARD PICTOGRAMS:

Hazard Statements: Causes serious eye irritation. Causes skin irritation. May be corrosive to metals.

Precautionary Statements: Wear eye protection. Wear protective gloves. Wash thoroughly after handling. Keep only in

original container. Absorb spillage to prevent material damage.

Acute/Potential Health Effects:

EYES: Causes eye irritation.

SKIN: Causes skin irritation. Prolonged or repeated skin contact may cause drying, cracking, or irritation.

INHALATION: Under normal conditions of intended use, this material is not expected to be an inhalation hazard.

Overexposure to mists or vapors, or when using in confined spaces without proper ventilation, may cause irritation to upper

respiratory tract and mucous membranes.

INGESTION: May be harmful if swallowed in excessive quantities. May be corrosive to the digestive tract: may cause gastric

distress, vomiting, stomach pains.

Chronic/Long Term Effects: Individuals with chronic respiratory disorders such as asthma, chronic bronchitis, emphysema,

etc. may be more susceptible to irritating effects.

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET Mildew & Mold Stain Remover SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Product Code(s): Other means of Identification: Recommended Use: Mildew & Mold Stain Remover MILX-32, MILX-128 Sodium Hypochlorite Cleaner Manufacturer/Marketer: P.F. Harris Manufacturing Company, LLC P.O. Box 1922 Cartersville, GA 30120 Email: info@pfharris.com www.pfharris.
PAGE 2
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/Mixture: Mixture Chemical Name Water Sodium Hypochlorite Lauramine Oxide Sodium Hydroxide CAS Number 7732-18-5 7681-52-9 1643-20-5 1310-73-2 WT % >75 1-10 <2 <2 The remaining components of this product are non-hazardous or are in small enough quantities as to not to meet thresholds for disclosure. These components contain no substances or impurities which influence the classification of this product. SECTION 4.
PAGE 3
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION EXPOSURE GUIDELINES EXPOSURE LIMITS OSHA PEL Chemical Name ppm mg/m3 ACGIH TLV ppm mg/m3 Sodium Hydroxide (1310-7-2) 2 2 Sodium Hypochlorite (7681-52-9) 2 2 Supplier OEL ppm mg/m3 ENGINEERING CONTROLS: Safety showers. Eyewash Stations. Ventilation System.
PAGE 4
SECTION 11. TOXICOLOGICAL INFORMATION Toxicological Data: Acute toxicity estimate: >5,000 mg/kg per calculation method Sodium Hypochlorite 7681-52-9 Oral LD50 (rat): 5,800 mg/kg Lauramine Oxide 1643-20-5 Oral LD50 (rat): >1,065 mg/kg Dermal LD50 (rabbit): >2,000 mg/kg Eye Contact: Causes serious eye irritation. Skin Contact: Causes skin irritation. Inhalation: Individuals with chronic respiratory disorders such as asthma, chronic bronchitis, emphysema, etc.
PAGE 5
SECTION 14.