Installation Instructions

Integration and Test, RBS 884 Pico (850 MHz and 1900 MHz)
9.4.2.5 Block EMs
! MAY BE NECESSARY IF EM HAS BEEN DEBLOCKED FOR
TESTING !
BLEMI:RP=134, EM=1;
9.4.2.6 Block RPs
! MAY BE NECESSARY IF RP HAS BEEN DEBLOCKED FOR
TESTING !
BLRPI:RP=134;
9.4.2.7 Bring MBLT86 CLC Devices into Service
EXDAI:DEV=MBLT86-1256;
9.4.2.8 Insert Control Signaling Link
EXCLI:DEV=MBLT86-8, EQM=CLC-14;
or if STC-G is used
EXCPI:EMG=00AA, DEVA=MBLT86N-08;
9.4.2.9 Allocate STC-G as an Alternative Method for C
LCs
This procedure is performed during the MSC integration. Refer to Step 18
on page 5-25 for the STC-G allocation activity.
9.4.2.10 Change the Digital Path Initial Data Parameters
DTIDC:DIP=52MTS3, MULTFS=01, MODE=1;
9.4.2.11 Define Exchange Data for EMG
EXEGI:EMG=P4P1, RPA=134, STRTYPE=
STR2C;
5-110 1532-AE/LZB 119 3834 Uae Rev PA4 2001-04-04